Carbon Fiber Side Skirts for Lamborghini Huracan
Better air flow with slightly reduced drag
Prevents rock chips to rock panels
Best in Class Pre-Impregnated Carbon Fiber Construction
Requires no alterations to the vehicle
Fits Huracan 2014-2020 LP610 & LP580
Sold as a pair
RSC Warranty & Product Support
The rear rocker panel area on the Huracan is a tricky area to design around due to the intake located just in front of the rear wheel. Our goal was to increase the size of the canard while still tying into the radiator inlet lines on the side of the vehicle. Of all the side skirt options available, we think we accomplished this goal the best.
You will also notice we filled in the rounded portion on the outboard side of the rocker panel to prevent rocks and debris from getting stuck and also to add some mass to the skirt to make it look more substantial. Sold as a pair, the RSC Side Skirts clean up the airflow and reduce drag down the side of the vehicle.
The RSC Carbon Side Skirts are produced with double bonded carbon fiber to create a show quality finish on the top and the bottom of the part and for added strength. With a prefect weave throughout the part and the deep luscious clear coat on these side skirts are sure to please the eye.
Designed with OEM fit and finish in mind these Side Skirts mount flush to the rocker panels via the fasteners in the supplied hardware kit. Engineered from a blank sheet of paper to be a functional aerodynamic component; these skirts reduce drag and cleanup the airflow around the vehicle.
RSC Tuning laser scanned their own in-house Lamborghini Huracan to engineer this part entirely in 3D CAD Software. After completing the design and engineering phase of the Huracan Side Skirts, RSC 3D Printed prototypes to validate perfect fitment and ensure a OEM quality final installation. Next production tooling was manufactured from the final CAD files for the production parts.
The RSC Huracan Side Skirts can be installed effortlessly via number of different methods. RSC’s preferred installation method is through-bolting the parts with the supplied hardware and fasteners. Alternatively, the Side Skirts can be riveted on along with High Strength 3M VHB Tape and the 3M Adhesion Promoter if removing the rocker panels is not desired..
Each pair of RSC Tuning Huracan Side Skirts is hand made by the finest composites craftsman. Manufactured with premium 100% pre-impregnated carbon fiber with an immaculate 3k 2x2 Twill pattern with a gloss finish. (Matte finish and alternative fabrics available upon request)
Two year warranty against discoloration and defects.
We value our relationship with you and the greater car community. If for any reason you are not satisfied with the Function, Fit, Finish of your RSC product you can return it for a full and prompt refund.